SAS Motors Limited has a wide range of mechanisation solutions for farmers growing medicinal plants
SAS Motors Limited, has a developed a range of different models of Angad Diesel Hal/Angad Power Hals with Petrol and Diesel engines in 6-8 horsepower (HP) range suited to various agro-climatic and soil conditions and farming practices in prevalence in India.
These variants of Angad Hal machines are available in both centre rotary and rear rotary models which can easily be operated in plant to plant row spacing of as low as 18 inches (46 centimetres).
Interested farmers can get in touch with us to get a customised solution for their medicinal crops.
Field Operations | Brief Description | Suitable Angad Hal attachment available for field operation |
Field Preparation | Tillage and Levelling | Angad Rotavator & Reversible Mould Board Plough and Leveller |
Seedbed Preparation | The ridges and furrow in the seeds will be planted can be prepared | Angad Ridger and Angad Furrower |
Seeds Planting | Planting by seed drill and planters give better germination rate and yields. Also, the weed management and harvesting operations are less cumbersome for seeds sown with the help of these machine. Seed drills and planters place the seeds in the Soil, usually 1 To 2 inches deep, depending on soil and crop type | Seed Drill |
Irrigation | As the Plants Demand It, When Available, Additional Water Is Delivered to The Fields. | Angad Water Pump |
Sprinkler Irrigation | Sprinkler Irrigation Is Much Like Lawn Sprinklers Where Pressurized Water Is Sprayed Out Over an Area. | Angad Spray Pump |
Weeding | To Remove Unwanted Weeds | Angad Rotavator & Cultivator |
Spraying | To Spray Various Micro/Macro Nutrients, Pesticides, Insecticides or Weedicides. | Angad Spray Pump |
Enquire Now
Angad Diesel Hal/Angad Petrol Hal/Angad Power Hal
Self-propelled agriculture farm mechanisation solutions consists of a box section chassis, 6- 8 HP (horsepower) Petrol/Diesel engine, transmission system, drive wheels, tool mounting bar of 70 x 70 mm size.
The engine, gearbox and tool mounting bar are fixed to main chassis. The engine is mounted on front side of the chassis on proper foundation. The gearbox with transmission system is mounted in the middle of chassis. Two steel lugged drive wheels of 500 mm diameter and 110 mm width are mounted on both ends of hexagonal shaft connected to transmission box.
The wheel tread (spacing between two wheels) can be adjusted from 400 to 650 mm to suit the row-to-row spacing of different crops.