SAS Motors Limited has a wide range of mechanisation solutions for each and every type of sugarcane cultivation practices in prevalence in India
Sugarcane is one of the main crops used in the production of sugar: 70% of the world’s sugar is made from sugarcane. In India, Sugarcane is grown as a Kharif Crop. It needs hot and humid climate with an average temperature of 21°C to 27°C. 75-150 cm rainfall is favourable for sugar cane cultivation. Irrigation needed for areas with lesser rainfall. Sugarcane can grow in any soil which can retain moisture. Ideal soil for sugarcane is deep rich loamy soil.
Sugarcane is an important cash crop in India, occupying 40 lakh hectare area. It is grown in two distinct agro-climatic regions: the tropical and sub tropical; Maharashtra, Karnataka, Gujarat and Tamil Nadu being the important cane growing states in tropical region while Uttar Pradesh, Punjab, Haryana and Bihar are the four important states growing sugarcane in North India. Uttar Pradesh in sub-tropical occupy the top position as far as sugarcane crop area and sugar industry are concerned.
The average cane yield in India is about 70.0 tonnes per hectare while the sugar recovery is around 10.0 percent.
Keeping in mind the varying methods of sowing and row to row spacing of sugarcane planting adopted by farmers of different regions, states, districts and tehsil/taluks in India. We have a developed a range of Sugarcane specific models of Angad Diesel Hal/Angad Power Hals with Petrol and Diesel engines in 6-8 horsepower (HP) range.
Additionally, we have these machines in both centre rotary and rear rotary models which can easily operate in sugarcane plant to plant row spacing of as low as 18 inches (46 centimetres). Sugarcane farmers can get in touch with us to get a customised solution for their sugarcane farming practices.
Suitable Angad Hal attachment available for field operation
Churning of Soil and Mixing the Nutrients
Angad Rotavator & Reversible Mb Plough And Leveller
Digging of Furrow
To Remove Unwanted Weeds
Angad Rotavator And Cultivator
To Apply Water to The Fields
Angad Water Pump
Angad Diesel Hal/Angad Petrol Hal/Angad Power Hal
Self-propelled agriculture farm mechanisation solutions consists of a box section chassis, 6- 8 HP (horsepower) Petrol/Diesel engine, transmission system, drive wheels, tool mounting bar of 70 x 70 mm size.
The engine, gearbox and tool mounting bar are fixed to main chassis. The engine is mounted on front side of the chassis on proper foundation. The gearbox with transmission system is mounted in the middle of chassis. Two steel lugged drive wheels of 500 mm diameter and 110 mm width are mounted on both ends of hexagonal shaft connected to transmission box.
The wheel tread (spacing between two wheels) can be adjusted from 400 to 650 mm to suit the row-to-row spacing of different crops.